SAFETY
PRECAUTIONS
21. Do not stand between the tractor and the machine unless the hand break
is tight and/or stops have been placed under the wheels.
22. Before any adjustments, maintenance or repairs are carried out, ensure
that the machine cannot be started up accidentally.
ATTACHING IMPLEMENTS TO TRACTOR
1. When attaching or removing the machine from the tractor, position
hydraulic lift control lever in such a way that it cannot be set off accidentally.
2. When attaching the machine to the tractor hydraulic linkage, ensure that
diameter of the link pins corresponds to the diameter of the ball joints.
3. Warning! Danger of crushing and shearing can exist in the lifting zone of
the tractor hydraulic linkage!
4. Do not stand between the tractor and the machine when operating the
outer lever of the lift mechanism.
5. In transport, the machine lift mechanism should be stabilized by the
tractor tie rods, to avoid flotation and side shifting.
6. When transporting the machine, lock the hydraulic lift control lever in
place so that it cannot be lowered accidentally.
HYDRAULIC SYSTEMS
1. Warning! Hydraulic system is under pressure.
2. When fitting hydraulic motors or cylinders, ensure that connections have
been made correctly, as per manufactures instructions.
3. Before connecting hoses to the tractor hydraulics, ensure that tractor and
machine circuits are not under pressure.
4. It is strongly recommended that the operator marks the hydraulic
connections between tractor and machine to avoid making a wrong
connection.
Warning! Functions could be reversed (For example: lift/lower)
5. Check hydraulic hoses regularly! Worn or damaged hoses must be
replaced immediately. Replacement parts must be in accordance with the
manufactures recommendations concerning specifications and quality.
6. Should a leak be found, take all necessary precautions to avoid accidents.
7. Any liquid under pressure (particularly oil from hydraulics) can be
penetrate the skin and cause severe injury. If injured, see a doctor
immediately, there could be a danger of infection.
8. Before any adjustments, maintenance or repairs are carried out, lower
the machine, depressurize the circuit, turn off the engine and remove the
ignition key.
SAFE MAINTENANCE
1. Before checking for any machine malfunction and before adjusting,
maintaining or repairing the machine turn off engine and remove ignition
key.
2. Check tightness of nuts and bolts regularly. Retighten if necessary.
3. If the machine is raised, prop it up in a stable position before carrying out
any maintenance work
4. When replacing a work part, wear protective gloves and use only
standardized tools.
A100 EH Operator’s Manual
11 //
49
