CONTROLLER
INFORMATION
THE DISPLAY MENU
The Display menu is divided into 3 sections. At the top level are the settings
used during the daily work with the machine – i.e. Store totals, No. of Wraps,
Debug information and Bale count down for service interval. The Operator
Setup section enables the operator to perform adjustments to the machine
operation – e.g. Auto settings, Controller configuration, time duration and
time delay settings during the automatic cycle. The ‘Technician Setup’
menu is not normally accessible to the operator without a PIN access code.
‘Technician Setup’ is not covered by this manual. The ‘Auto Park Sequence’
allows for fast folding to transport position and fast unfolding to working
position. Use the 4-way switch to navigate the menu. Each menu screen
indicates which keys to press to make the settings. The instrument will
default back to the main operating display after 30 seconds if no other key is
pressed.
1
Scroll Up
2
Current Wrap Am Speed
3
Scroll Down
4
Current Wrap Count
5
Set no. of Wraps
6
Operation Mode; 'M' - Manual / 'A' - Automatic
7
Supply Voltage
A100 EH Operator’s Manual
27 //
49
