5. It is forbidden to discard any oil, grease or filters. These must be given to
waste disposal organizations to protect the environment.
6. Disconnect power source before any work is done to the electric system.
7. Check safety guards regularly, particularly those that are subject to wear.
Replace immediately if damaged.
8. Spare parts used must be in accordance with specifications and standards as
defined by the manufacturer. Use only genuine TANCO parts.
9. Before any electric welding is carried out on tractor or attached machine,
disconnect generator and battery terminals.
10. Repairs on elements under pressure or tension (spring, accumulators etc.),
must only be carried out by competent persons with standardised equipment.
SPECIAL SAFETY INSTRUCTIONS
1. Stop engine of the tractor before working on machine.
2. Use the Safety Bar (1) to prop up the Tip Frame (2) before attempting to carry
out work in this area.
3. During machine operation the Safety Pin (1) is fitted to the Load Arm (2) as
shown
3. During transport and parking the Safety Pin (1) must be fitted the opposite
way as shown
4. Always raise lift Arm and fit Safety pin before transporting machine on public
roads.
5. Lift Arms should always be lowered before operating turntable.
SAFETY
PRECAUTIONS
6. Ensure platform rollers are parallel to Lift Arm before arm is raised.
2
1
1
A100 EH Operator’s Manual
12 //
49
