CONTROLLER
INFORMATION
OPERATION IN MANUAL MODE
‘M’ on the display indicates that the controller is set in manual mode. If not,
press L6 to select. In manual mode you have total control of every stage of the
wrapping cycle. The software logic determines which manual functions can be
activated at any point in the wrapping cycle. Should the operator incorrectly
select a function at a certain stage during the wrapping cycle, then that
operation will not be performed.
Film Break Alarm (Optional on A100EH)
If the film breaks or runs out during the wrapping cycle, the instrument will
sound an audible alarm and the display will show ‘FILM BREAK’.
Wrapping will stop at this point. Press R3 when you are ready to resume the
auto-wrap cycle.
A100 EH Operator’s Manual
31 //
49
