TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
18
The working unit consists of two working drums, with cutting blades rotationally embedded
in the lower part of the drums. Diagram of the drive system is shown in Figure 3.
Figure 3 Drive system diagram:
1 – articulated telescopic shaft; 2 – drive head shaft; 3 – freewheel clutch (on
large pulley); 4 – V-belt transmission; 5 – main frame shaft; 6 – bevel gear; n1 – rotational speed of tractors
PTO; n2 – rotational speed of drums (values given in Table 2); z1 – large bevel gear; z2 – small bevel gear.
Figure 4 Eco CUT 210 drive system diagram:
1 – articulated telescopic shaft with one-way clutch; 2 – drive
head shaft; 4 – V-belt transmission; 5 – main frame shaft; 6 – bevel gear; n1 – rotational speed of tractors PTO;
n2 – rotational speed of drums (values given in Table 2); z1 – large bevel gear; z2 – small bevel gear.
The drums are driven by the tractors PTO shaft. Together with the blades, they rotate in
opposite directions, cutting plants and forming green forage in a swath. The one-way clutch
allows the drums to rotate freely after the engine is shut off, and protects the driving
elements from damage.
Technical-operational data for mowers are provided in Table 2.
