TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
24
6.2. Connecting the mower to a tractor
Make sure that the connecting parts of both, the vehicle and the machine, are
suitably
adjusted
to
each
other.
In case of any doubt, always ask the vehicle or the machine manufacturer.
The mower should be connected with the tractor by means of a three-point hitch
suspension system. During connection, the mower should be in transportation position.
Figure 9 Aggregating – connecting the mower
In order to connect the mower to the tractor:
1.
On the pins (Fig. 8, item1) of the suspension frame, fit the tractor’s lower connectors
(first left, then right), and secure them with linchpins.
2.
Insert the top connector’s tip between the yoke plates, using the holes (Fig. 8, item
2), then connect with a pin and secure with a linchpin.
3.
Raise the mower to take the weight off the support foot.
4.
Raise the support foot and secure it with a cotter pin.
5.
Connect the chain to the transportation hitch or its bracket.
Adjust length of the articulated telescopic shaft to the tractor, according to the shaft’s
instructions.
