TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
26
Figure 12 Suspension frame locking pin: (A) inside the clevis hole (B) removed from the clevis hole
For mower models with hydraulic cylinder 2.10m, 1.85m and 1.65m:
1.
Park the tractor and mower on a flat, even surface,
2.
Remove the securing element from the upper pivot of the suspension
frame,
3.
Raise the mower with a hydraulic cylinder of the tractor, so that the
sliding discs do not rest on the ground,
4.
Raise the support foot to the upper position, and secure with a cotter pin,
5.
Manually place the mower in transportation position, so the interlock pin
is inserted into the hole in clevis (rope must be loose) (Fig. 11A),
6.
Bring the cylinder to transportation position, until the cylinder lock gets
triggered (Fig. 13A). Transportation position is shown in the Figure 12.
Figure 13 Proper transport position for 2.10m, 1.85m and 1.65m mowers with hydraulic cylinder
