TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
25
6.3. Transport position
For the mowers transportation, it should be set in the transportation position.
Articulated telescopic shaft must be detached from both, the tractor and the mower.
For models with connectors:
1.
Park the tractor and mower on a flat, even surface,
2.
Remove the securing element from the upper pivot of the suspension frame.
3.
Set the interlock to the transportation position (Fig. 9A).
4.
Raise the mower with a hydraulic cylinder of the tractor, so that the sliding discs do
not rest on the ground.
5.
Raise the support foot to the upper position, and secure with a cotter pin.
6.
Manually place the mower in transportation position (Fig. 10), so the interlock pin is
inserted into the hole in clevis (rope must be loose) (Fig. 11A).
For the model 1.35m, place the transportation bar on the top pin of suspension
frame and secure it with a cotter pin.
Figure 10 Interlock: transport position/working position
Figure 11 Mower
position:
1) transportation position,
2) working position
