TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
33
Figure 22 Checking of the proper adjustment of V-belts tension: 1) inspection opening for checking the
tension of the belts
7.2. Replacing the blades:
The cutting blades must be replaced in compliance with the specific safety rules:
1.
Use only the original and functional parts for the cutting unit.
2.
Each time the replacement must include the full set. You must remember about the uniform
distribution of the rotating masses, to ensure the uniform wear of the blades.
3.
Check the condition of the related components: holder, knife. Replace them with new ones if
any damage occurs.
4.
When tightening bolted joints observe the values in Table 3, to ensure appropriate tightening
torque of screws and nuts.
Worn out or damaged elements must be obligatorily replaced with new ones.
Working with damaged elements of the working disc, holders or blades, is strictly
prohibited.
Inspection of the blades should be performed every time before you
start working and after each instance of hitting an obstacle, e.g.
stone, wood, metal. It is mandatory to wear protective gloves.
