TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
37
7.5. End of season servicing
Includes all the tasks listed in the paragraph: 7.3 Maintenance after work. In addition, the
machine should be stored under shelter, on a flat and hard surface and supported on its
foot. Attention should be paid to the tightness of paint coat. In the event of paint losses, you
must clean these spots and fill in the losses with the new coat of protective paint.
V-belt tension in the off-season should be reduced (belts should be loose). Prior to
commencing the next season’s work, the belts must be properly tensioned again.
In the case of leaks from the hydraulic system, the damaged parts and
components must be replaced to avoid contamination of the environment.
Hydraulic lines, regardless of their external condition, must be replaced
after 5 years.
7.6. Possible problems and solutions
Problem symptoms
Problem cause
Possible solution
Increased vibration of
mower
Unevenly worn out or
damaged parts of cutting unit
Units with worn out elements replace
with new complete sets
Bad cutting and clogging
of the cutting unit
Dull or damaged blades
Replace dull or damaged blades with
new complete sets
Blades dull on one side only install on
the disc with the opposite direction of
rotation
V-belts slippage
Poorly tensioned belts
Belts are wet
Belts are worn out
Belts of unequal length
Check and adjust the belts tension
Avoid mowing when it’s raining
Replace with new complete sets of
belts
Within one set of belts, there should
be belts made by one manufacturer
and bearing the same dimension
markings
