Taktis Incite Fire S3, Руководство по эксплуатации

Страница: 72 / 211

Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
Taktis AS7240.2, AS7240.4 and AS7240.13 compliant fire alarm control panels are available with 2 to 8 loops and two enclosure sizes.
The modular construction allows control panels to be configured with a range of options including, zonal fire indicators, a printer, additional supervised
ancillary inputs and outputs, networking Taktis Fire Control Panels together for larger system applications and remote communications through Ethernet,
telephone lines or mobile communications networks.
A large format, touch screen display is used to provide an exceptionally clear and intuitive user interface.
This product should be installed, commissioned and maintained by trained service personnel in accordance with the following:
(i) Regulations for electrical equipment in buildings specific to the country of use
(ii) Codes of practice
(iii) Statutory requirements
(iv) Any instructions specifically advised by the manufacturer
Only fire rated and shielded cable should be used.
Note: For LPCB approved installations use only FP200*, 1.5mm2 2 core cable.
Environmental Considerations
The PSU’s are mounted in steel enclosures within the CIE with an ingress protection rating of
IP30. The operating temperature range should not exceed -5°C to +40°C (±2°C). Humidity levels should
not exceed 95% (non-condensing).
Standards and Directives
The control equipment is designed in compliance with standards and directives for:
• Low Voltage Directive 2006/95/EC
• EN60950 Safety of information technology equipment
• EN50130 Electromagnetic compatibility -product family standard
• EMC Directive 2004/108/EC"
• AS7240.2
• AS7240.4
• AS7240.13
• VdS requirements
Declaration Of Performance
Taktis fire alarm control and indicating equipment and power supply equipment conform to the essential requirements of the Construction Products
Directive 89/106/EEC: