Taktis Incite Fire S3, Руководство по эксплуатации

Страница: 170 / 211

Maintenance and Repair 4
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
99 of 156
Removing the Fuse
To remove the fuse:
The figure below illustrates the open fuse-housing:
Figure 4-3
Open Fuse Housing
Reference Appendix B, Equipment List for spare fuses included in an accessory pack of this product.
Replacement fuses must match the types originally fitted on the fire control panel.
Care must be taken to select the correct one when fitting replacements.
1 Turn off the main breaker that feeds AC power to the fire control panel.
2 Locate the housing containing the 3 Amp fuse.
Reference Figure 4-2.
3 Remove the upper-half of the fuse-housing with long-nose-pliers.
4 Remove the fuse from the upper-half of the fuse-housing.
WARNING!
This is a high voltage circuit area. An electrical shock hazard exists in this area when the control panel is
operating. Do not remove the fuse while powering the fire control panel. Remove AC power at the source
before attempting to remove the 3 Amp fuse of the power supply.