Taktis Incite Fire S3, Руководство по эксплуатации

Страница: 175 / 211

Maintenance and Repair 4
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
104 of 156
7 Remove two hinge-pins of the Cabinet-Lid and then remove the Cabinet-Lid from the Cabinet-Box of
the fire control panel.
Return the two hinge-pins to the hinges of the Cabinet-Box for safekeeping.
Figure 4-8
Removing the Hinge-Pins of the Cabinet-Lid
8 Remove two Phillips-head retaining-screws from the back-plate and then remove the back-plate from
the Taktis Fire Control Panel cabinet.
Fit the two retaining-screws in the empty-holes of the box for safekeeping.
Figure 4-9
Removing the Back-Plate and the Standby-Batteries
9 Remove the Standby Batteries from the base of the Cabinet-Box.
To remove the Cabinet-Lid from the Cabinet-Box:
1 Pull the head of the upper-hinge-pin (A)
away from the hinge-assembly using
needle-nose-pliers.
2 Brace the top-corner of the cabinet-door to
maintain alignment with the lower-hinge.
3 Pull the head of the lower-hinge-pin (B)
away from the hinge-assembly using
needle-nose-pliers.
4 Remove the Cabinet-Lid from the
Cabinet-box of the Taktis Fire Control Panel
when the two hinge-pins have been
removed.
To remove the Back-Plate from the Cabinet-Box:
1 Remove two phillips-head mounting-
screws (A) from the top portion of the
Back-Plate.
2 Slide the Back-Plate upward to remove it
from tabs (B) of the Cabinet-Box.
3 Place the two phillips-head mounting-
screws in the holes of the Cabinet-Box for
re-attaching the Back-Plate.