Taktis Incite Fire S3, Руководство по эксплуатации

Страница: 130 / 211

Installation 3
Taktis Fire Control Panel - Installation Manual
Man-1154-In, Revision E01.02
59 of 156
6 Remove the two ribbon cables from the LCD Main Processor Board.
The cables will be reconnected to the LCD Main Processor Board following Cabinet -Box fixing.
Figure 3-6
Removing Ribbon Cables
7 Remove four hinge-pins of the Fascia and then remove the Fascia from the Cabinet-Box of the fire control panel.
Return the four hinge-pins to the hinges of the Cabinet-Box for safekeeping.
Figure 3-7
Removing Hinge-Pins of the Fascia
To remove the Fascia from the
Cabinet-Box:
1 Pull the head of the upper-
hinge-pin (A) away from the
hinge-assembly using
needle-nose-pliers.
2 Brace the top-corner of the
Cabinet-Lid to maintain
alignment with the lower-
hinge.
3 Pull the head of the lower-
hinge-pins (B), (C) and (D) away
from the hinge-assembly using
needle-nose-pliers.
4 Remove the Fascia from the
Cabinet-box of the Taktis Fire
Control Panel when the four
hinge-pins have been removed.