Tait TM8235, Руководство по обслуживанию

Страница: 562 / 578

562 TMAA10-04 Remote PTT Kit and TMAA10-05 Hands-Free Kit TM8100/TM8200 Service Manual
© Tait Electronics Limited June 2006
2. In the VOX menu, choose
On
.
3. Press
Select
.
While VOX is on, the VOX indication may be
programmed to appear below the channel infor-
mation on your display.
Changing the
Sensitivity of VOX
You may need to change the threshold at which the radio detects your voice
and makes a call. To do this, you use the VOX Sensitivity menu.
1. Select Menu>Radio Settings>
Function Settings>VOX Sensitivity.
2. In the VOX Sensitivity menu, use the scroll keys
or to adjust the VOX sensitivity to the
desired level.
3. Press
Done
to save this setting.
32.2 Installation
Important
Care should be taken to avoid routing any cables near vehi-
cle pedal controls, steering column and other moving parts.
Installing the
Remote
Microphone
1. Choose one of the three mounting options provided for the remote
microphone and determine its most appropriate location.
The mounting position of the microphone should be no more than
50cm (20 inches) from the user’s mouth.
2. Route the remote microphone cable so as not to distract the driver.
3. Mount the remote microphone in the chosen location and check
that the microphone and cable are clear of all the usual movements
performed by the user.
Installing the
Remote PTT
(TMAA10-04)
Important
The remote PTT must be operable from a normal
driving position.
1. Secure the remote PTT in position using the velcro strap and plug the
remote PTT cord into the remote PTT extension lead.
A common position for the remote PTT is on the gear lever of
the vehicle.