Tait TM8235, Руководство по обслуживанию

Страница: 17 / 578

TM8100/TM8200 Service Manual Introduction 17
© Tait Electronics Limited June 2006
1.4 Product Codes
This section describes the product codes used to identify products of the
TM8100 and TM8200 mobile radio product lines.
General
The product codes of the TM8100 and TM8200 mobile radio product lines
have the format:
TMA abc – ddee
where:
■
a identifies the product category:
A=accessory, B=radio body, C=control head, S=software feature
■
b , c , dd and ee identify specific product features.
Radio Bodies
The product codes of the radio bodies have the format:
TMAB bc – ddee
where:
■
b identifies the architecture of the digital board:
1=conventional analog
2=conventional analog (dual-mode capability)
3 identifies the digital boards of the digital TM9100 product line.
■
c identifies the RF output power:
2=25W, 3=25W (trigger-base), 4=30 to 59W,
5=30 to 59W (trigger-base).
■
dd identifies the frequency band:
A4=66 to 88MHz, B1=136 to 174MHz, C0=174 to 225MHz,
D1=216 to 266MHz, H5=400 to 470MHz, H6=450 to 530MHz,
H7=450 to 520MHz.
■
ee identifies any radio options:
00=BNC RF connector, 01=mini-UHF RF connector
Control Heads
The product code of the control heads has the format:
TMAC bc – dd
where:
■
b identifies the control-head type:
1=blank control head, 2=2-digit-display control head,
3=RJ45 control head, 4=graphical-display control head,
5=1-digit-display control head, 6=3-digit-display control head.
■
c identifies the control-head configuration:
0=no options, 4=RS-485 option
1 identifies the control-head configuration of the digital TM9100
product line.
■
dd identifies label and branding options:
0T=Tait, 0U=unbranded.