Tadano ATF 130G-5, Перевод оригинального руководства по эксплуатации

Страница: 596 / 636

BEKA-troniX1 integrated electronic controller:
Standby indicator:
Lubrication sequence:
Grease level too low:
Excess pressure in main system:
Revolution error in pump engine:
Memory error:
Test lubrication:
8
The pump´s functions are indicated via two control LEDs
(green/red) in the display on the pump´s motor casing,
where the red LED always indicates an error in the program
sequence.
a) Standby
b) Lubrication activated
c) Grease level error
d) Excess pressure error
e) Revolution and engine driver error
f) Memory error
BEKA-troniX1
7. Summary of Signal Indicators
Red LED error indicator
Green LED function indicator
Standby: 1.5 sec.
ON
OFF
OFF
ON
LED red
LED green
LED green
During whole lubrication
ON
OFF
OFF
ON
LED red
LED red
1 sec.
1 sec.
OFF
ON
ON
OFF
LED green
LED red
Until reservoir is filled
ON
OFF
ON
OFF
LED green
LED red
1 sec.
1 sec.
OFF
ON
ON
OFF
LED green
LED red
0.5 sec.
0,5 sec.
ON
OFF
ON
OFF
LED green
LED green
LED red
1 sec.
1 sec.
ON
OFF
ON
OFF
These control LED functions may be indicated in the
driver´s cap of the vehicle via built-in signal lamps. These
must be ordered additionally.
e) Test lubrication (constant lubrication)
In order to adjust the time controlling to continual lubrication
for servicing purposes, the lubrication time must be set to a
higher value than the cycle duration.
© BEKA
2012 All rights reserved!
Subject to alterations!