Back to Table of Contents
12
6
Mounting PRX-40/B and PrintX FPR
1. Select a location for the terminal using the following guidelines for find-
ing the best location, above.
2. Hold the mounting template to the wall and mark the places to drill holes
for the screws and cables.
3. Drill the holes for the connection cable and screws (with 6mm. drill bit).
4. Inset the screw anchors for either plaster or concrete, as needed.
5. Thread the cable through the wall and connect to external components
as needed.
Mount the panel to the wall and adjust it so that it is straight and the
cable is in place.
