Symmetricom TimeAnalyzer 7500, Руководство пользователя

Страница: 101 / 148

098-00208-000 Revision A – February, 2010 TimeAnalyzer 7x00 User’s Guide 99
Chapter 4 Operating
E1 Measurements
3. Start the TimeMonitor Watch module on the PC used to communicate with the
TimeWatch probe module.
4. Click the TCP/IP button.
5. Enter the IP address for the external client to be measured. Click the OK button
to return to the main screen.
6. Use the TimeMonitor Watch radial button for "Ref" to select E1 or 2M as the
signal format of the Reference input. Select 2M if using the TP5000 probe
module in its default mode for Port 1 output.
7. Use the TimeMonitor Watch radial button for "Meas" to select E1 or 2M as the
signal format from the external client
8. Use the Sample Rate radial buttons to select the desired sample rate for the E1
measurement.
9. To begin the measurement, click the Start button.
10.
During a measurement, a plot of the phase collected so far can be produced by clicking
the View button, as shown in
Figure 4-5
.
11.
By clicking the MTIE button, Live MTIE can be viewed, as shown in
Figure 4-6
.
12.
By clicking the TDEV button, Live TDEV can be viewed, as shown in
Figure 4-7
.
13.To end the measurement, click the Stop button.