3
Installing the 24-Port Adapter
3-4 Sylantro 24-Port Adapter Installation Guide
For cables used with analog adapters, there are two wires per telephone port that
should be punched down as shown in Table 3-1. For example, to make the
connection for port 1, follow these steps:
(a)
Put the white/blue wire from pin 26 in the tip connector for port 1 on the
back of the punch-down block, and punch it in using a punch-down tool.
(b)
Put the blue/white wire from pin 1 in the ring connector for port 1 on the
back of the punch-down block, and punch it in. Later you will connect the
twisted pair from each of the telephones to the corresponding port on the
front of the punch-down block.
Table 3-1
Analog Punch Down Information
Binder
color
Port
Pin
Stripe
color
Wire color
Signal
White
1
26
Blue
White/Blue
Tip
1
Blue/White
Ring
2
27
Orange
White/Orange
Tip
2
Orange/White
Ring
3
28
Green
White/Green Tip
3
Green/White Ring
4
29
Brown
White/Brown
Tip
4
Brown/White Ring
5
30
Slate
White/Slate
Tip
5
Slate/White
Ring
Red
6
31
Blue
Red/Blue
Tip
6
Blue/Red
Ring
7
32
Orange
Red/Orange
Tip
7
Orange/Red Ring
8
33
Green
Red/Green
Tip
8
Green/Red Ring
9
34
Brown
Red/Brown
Tip
9
Brown/Red
Ring
10
35
Slate
Red/Slate
Tip
10
Slate/Red Ring
