Sylantro 24-Port Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 52

Sylantro 24-Port Скачать руководство пользователя страница 21

Sylantro 24-Port Adapter Installation Guide 2-1

Chapter

2

2

Preparing for the 24-Port

Adapter Installation

This chapter describes all of the tasks that must be performed before a client adapter
is installed. Site power, network, cabling, and safety requirements are given along
with unpacking instructions.

This chapter contains the following topics:

■

“Overview of the Installation Tasks” on this page.

■

“System Requirements” on page 2-3.

■

“Safety Requirements” on page 2-4.

■

“Tools and Equipment Needed” on page 2-6.

■

“Unpacking the Adapter” on page 2-6.

Overview of the Installation Tasks

The adapter is usually installed inside the wiring closet or data room at the customer
site. Make sure that the network and power connections are available in the wiring
closet prior to installation.

The installation procedure involves the following tasks:

1.

Verifying that the power, cables, and network connections meet the
requirements.

2.

Unpacking the system.

3.

Rack mounting the adapter.

4.

Installing a 24-port analog/digital punch-down block.

5.

Wiring the punch-down block.

«
...
19
20
21
22
23
...
»

Содержание 24-Port





















































Отзывы:

Нет отзывов