Swisscom TeleAlarm S12, Руководство пользователя

Страница: 21 / 40

AUTOMATIC MONITORING
21
Signals of the LED indica-
tor
The LED indicator provides quick in-
formation on status and failures ac-
cording to the following table:
Status LED indicator
No failure
detected GREEN
(continuous)
Failure detected GREEN
(blinking)
Pre-alarm
RED
(blinking)
Call for help
RED
(continuous)
Programming
mode ORANGE
(blinking)
Loudspeaker signals
As soon as a failure is detected or as
soon as another unusual process oc-
curs, the loudspeaker will inform you
of this according to the following table
via a sequence of sound signals:
Event Tone
At the start-up
=i=X=f=i=h=v
At a hardware failure or in the
programming mode as warn-
ing beep tone
=V=ÕU=U=
Immediately prior to the pre-
alarm sound signal
=T=V=Y=
Pre-alarm sound signal (ring-
ing)
=[=x=
…
Pre-alarm sound signal (two-
tone siren)
=f=i=f=i=f=i=
…
TeleAlarm ® S12
identification
=f=i=h=
At the end of the alarm
=Y=V=T=r=
At a telephone line fault (con-
tinuous mode)
=F=F=;=F=F=;
…
At a power supply failure
(continuous mode)
=ÕE==;=ÕE=;
…
At a valid testing of the radio
transmitter range
=d=f=i=
Before starting the recording
of the voice message or at the
successful reprogramming in
the programming mode
=R=y=
After the end of the recording
of the voice message
=Y=r=