Swisscom TeleAlarm S12, Руководство пользователя

Страница: 23 / 40

PROGRAMMING
23
Programming or deleting a
radio transmitter
Each (wireless) radio transmitter must
be registered separately to enable the
transmission of a call for help.
Your TeleAlarm
® S12 is fitted with 20
storage positions for the registration of
20 radio transmitters.
This section describes the registration
of additional radio transmitters.

Press

(radio transmitter pro-
gramming key) on the programming
keyboard.
The display will show the message:
¯ OK:Program
0:Erase ¤:Info

Press

to start the registration of
a new radio transmitter.
The display will show the message:
¯ Radio Nr. 02
Program
 Press

to confirm that you wish to
save the new radio transmitter in
position 2.
The display will show the message:
¯´ Press Radio
Button
 Press the alarm key on your radio
transmitter key on your wrist trans-
mitter S37.
Programming a silent alarm
When the transmitter code is ac-
cepted, the following display will tem-
porarily appear.
¯ Transmitter code
accepted
The TeleAlarm S12 will invite you to
assign an alarm type to the radio
transmitter: select the alarm type “As-
sistance Alarm” for standard alarms.
¯ Alarm type: 00
Assistance Alarm £
Or do the following:
Select “Generic silent Alm” (Alarm
type 39) for silent alarm by scrolling
the display with the

and

keys.
¯ Alarm type: 39
Generic silent Alm ¢
Confirm by pressing the

key. The
following display will temporarily ap-
pear.
¯ Transmitter
Stored !
then:
¯ OK:Program
0:Erase ¤:Info