Swisscom TeleAlarm S12, Руководство пользователя

Страница: 14 / 40

GETTING STARTED
14
When the transmitter code is ac-
cepted, the following display will tem-
porarily appear.
¯ Transmitter code
accepted
Programming a silent alarm
The TeleAlarm S12 will invite you to
assign an alarm type to the radio
transmitter: select the alarm type “As-
sistance Alarm” for standard alarms.
¯ Alarm type: 00
Assistance Alarm £
Or do the following:
Select “Generic silent Alm” (Alarm
type 39) for silent alarm by scrolling
the display with the

and

keys.
¯ Alarm type: 39
Generic silent Alm ¢
Confirm by pressing the

key. The
following display will temporarily ap-
pear.
¯ Transmitter
Stored !
then:
® OK:Program

Confirm your selection by pressing

.
The display will show the message:
® Talk after BEEP

Wait until the countdown has
reached 0 and then start to speak
after the beep tone to record the
desired message.
Sample of a recorded voice
message:
« This is a TeleAlarm call for help from
Mr. Walter, press key four (4) on your
telephone or call me back on 012
345 67 89. Before the conversation is
ended, press key zero [0]. »
.
A bar will show the recording pro-
gress.
®´ Recording …
············

Press


to cancel the recording
before its maximum duration or wait
until the end.