Swisscom TeleAlarm S12, Руководство пользователя

Страница: 22 / 40

PROGRAMMING
22
Programming
Most of the parameters required for
the normal operation can be pro-
grammed directly on the TeleA-
larm
® S12 unit. The independent pro-
gramming is done via the program-
ming keyboard and the LCD display of
the TeleAlarm
® S12.
The next sections contain simple ex-
amples of the most important setting
options, which are available for inde-
pendent programming.
Warning:
As long as the TeleAlarm
® S12 is in
the programming mode, it is not pos-
sible to transmit any alarm messages.
This mode regularly generates a beep
tone. If invalid keys are pressed, a
beep tone will indicate a mistake. After
4 minutes without any keys pressed,
the TeleAlarm
®
S12 will leave the pro-
gramming mode and return to the
ready mode.
To leave the programming mode at
once, press the

key (delete key)
several times until the display shows :
S12
is ready
(you are now in the ready mode ).
The above message will be shown on
the display screen, either on a con-
tinuous basis or alternating with warn-
ing messages if technical problems are
detected (backup battery is dead, loss
of power, no telephone connection,
etc.).
Keyboard overview

Alarm receivers programming key
Scroll up to the next parameter
Increase the audio level

Triggers programming key
Turn OFF an “ON/OFF” function

Access to special functions
Turn ON an “ON/OFF” function

Voice message programming key
Scroll down to the previous parameter
Decrease the audio level

Confirmation key

Cancel key

Status query key (information)

“Home-Away” control

Not Used