Swisscom TeleAlarm S12, Руководство пользователя

Страница: 13 / 40

GETTING STARTED
13

Select English using the keys

and

(up and down).
 Confirm your selection by pressing

.
The display will show the message:
° Destination Nr. 1
Program

Confirm that you wish to save the
recipient as target 1 by pressing

.
° Phone Nr.
»
 Enter the first alarm recipient’s tele-
phone number (up to 20 digits).
Each digit can be one figure (0-9),
an interval or an identification of a
new dialling tone.
Note:
Dial tone identification (T) and inter-
vals (P) can be entered by “double-
clicking" the

(identification of a
free telephone line) and

keys (time
delay 6 seconds, before dialling is
continued).
The emergency numbers 144, 117
and 118 may not be programmed into
your TeleAlarm® S12; the telephone
numbers of hospitals, doctors, etc.
may not be programmed without get-
ting permission to do so first.
Note:
At least one telephone number must
be registered. If several telephone
numbers are entered, please proceed
afterwards to the section « Program-
ming an alarm recipient ».
° Phone Nr.
0123456789

Use

to delete an entry if you
have made a mistake or confirm
your selection by pressing

.
The display will show the message:
° Destination
stored !
The display will show the message:
¯ Radio Nr. 01
Program

Confirm that you wish to save the
radio transmitter No. 1 by pressing

.
Note:
At least one radio transmitter must be
registered. If several radio transmitters
are entered, please proceed after-
wards to the section « Programming a
radio transmitter ».
The display will show the message:
¯´ Press Radio
Button

Press the call for help button on
your wrist transmitter S37.