Swisscom TeleAlarm S12, Руководство пользователя

Страница: 36 / 40

WARNINGS AND CONDITIONS
36
Warnings and condi-
tions
Important safety instruc-
tions

Carry out a test alarm regularly to
make sure that your TeleAlarm
®
S12
will work properly. (Follow the pro-
cedure which is described in this
manual).

Operate the TeleAlarm
®
S12 on
230V AC, 50 Hz with using the pro-
vided AC adaptor.

If you intend not to use the unit for a
longer period of time, make sure
that the AC adaptor is plugged out
from any 230V outlet; that the tele-
phone jack is disconnected and the
unit is switched off.

Do not use the TeleAlarm
®
S12 in
the immediate vicinity of water.

Do not block any ventilation out-
puts.
 Install it in compliance with the
manufacturer’s instructions.

Do not place the unit in the imme-
diate vicinity of heat sources or di-
rect sun light.

Avoid excess dust and mechanical
shock.

Occasionally wipe off your TeleA-
larm
® S12 with a dry cloth. Avoid
cleaning agents .
Battery maintenance in-
structions
Charge your battery completely over
24 hours before using your
TeleAlarm
® S12 for the first time, after
having replaced the battery or after a
longer power interruption.
The battery will charge correctly in a
temperature range from +5ºC to
+45ºC.
A new battery or a battery which has
not been used for a longer period of
time, might show a reduced capacity
in its first application.
A rechargeable battery can be
charged and discharged more than a
hundred times. It will, however, wear
out sometime and this is no defect
TeleAlarm
®
recommends replacing a
battery which is no longer capable of
ensuring a minimum energy accumu-
lation of 60 hours in the ready mode
and a minimum autonomy of half an
hour in the alarm mode with “hands-
free” speech communication.