Swisscom TeleAlarm S12, Руководство пользователя

Страница: 12 / 40

GETTING STARTED
12
Telephone network cord
The TeleAlarm
®
S12 has a serial tele-
phone connection and does not inter-
fere with normal telephone use. How-
ever, the unit will not work on ISDN
lines. Insert the small telephone con-
nection plug into the telephone con-
nection socket « LINE » and insert the
large telephone connection plug into
the telephone jack on the wall.
Telephone connection cord
Insert one of the telephone connection
cord plugs into the telephone connec-
tor socket

and insert the plug at
the other end of the telephone con-
nection cord into the phone for “se-
rial” use with the unit.
Getting started
Initial use
This section concerns only the initial
programming of the unit with default
factory settings (without centre pro-
gramming). For future or additional
programming operations, please refer
to « PROGRAMMATION » section.
 Turn the ON/OFF switch on the
bottom side of TeleAlarm
® S12 to
the ON-position.
After the unit has been turned on, the
TeleAlarm
®
S12 will prompt you to se-
lect a language, to program an alarm
recipient, a radio transmitter and a
voice message.
When the unit is turned on, the display
will show the following welcome mes-
sage for a few seconds:
* TELEALARM S12 *
Swisscom
The display will show the message:
¬ Sprache 0
Deutsch £
Important note:
If you do not see this display at this
point, it means that the unit has al-
ready been programmed. If this is the
case, you can simply skip this section
and follow the instructions in later sec-
tions for adding to or changing the
programming.