Swisscom TeleAlarm S12, Руководство пользователя

Страница: 24 / 40

PROGRAMMING
24
Your TeleAlarm
®
S12 is now ready to
program another radio transmitter.

Press

to save a new radio
transmitter or

to end the pro-
gramming and to return to the
ready mode.
The display will show the message:
S12
is ready
Note:
To delete a radio transmitter, press

and then the key (0).
Programming a silent
alarm
The S12 has the possibility to send si-
lent alarms. This means that all alarms
will be generated without any sound.
The programming of this type of alarm
can be done at initial use or when
programming of a radio transmitter.
Programming an alarm re-
cipient
To receive a call for help from the
TeleAlarm
® S12 the alarm recipient’s
telephone number must be pro-
grammed in the unit.
Up to 8 recipients can be pro-
grammed in the TeleAlarm
® S12.
Each recipient is identified via his tele-
phone number, which is programmed
in a storage position. In the event of
an alarm, the telephone numbers are
called one after the other, until one of
the recipients acknowledges the call.
This section describes how to program
an alarm recipient, e.g.:

The recipient’s target : target 2

Telephone number : 069 123 4566

Press

(the recipient’s pro-
gramming key) on the programming
keyboard.
The display will show the message:
° OK:Program
0:Erase ¤:Info

Press

to start the programming
of a new recipient.
The display will show the message:
° Destination Nr. 2
Program