Swisscom TeleAlarm S12, Руководство пользователя

Страница: 18 / 40

OPERATION
18
Presence control
(daily report)
Via the presence control, you will also
obtain help if you cannot press the call
for help button. The TeleAlarm
®
S12
automatically initiates a call for help if
no keys are pressed on the
TeleAlarm
®
S12 for a certain preset
amount of time.
Note :
Presence control can only be turned
on and off if the presence time is not
set to zero (see the Programming sec-
tion).
Turning the presence control on

Press the yellow button (or

).
The display will show the message :
Activity
Monitoring ON ª
Alternate with the « ready mode » .
Turning the presence control off
(For cases where you are absent for a
longer period of time than the set
presence time, such as visits, a vaca-
tion, etc..)

Press the yellow button (or

) and
hold it pressed for some time. The
following message will be deleted:
Activity
Monitoring ON ª
Triggering an automatic call for
help
A call for help will be triggered auto-
matically if the following conditions
are met:

Presence control is on.

No key is pressed during the pro-
grammed time period.
The call sequence (calling your con-
tacts) is the same as in
« Contacting a private individual ».
Back-lit coloured buttons
The three coloured buttons of the
TeleAlarm
® S12 are back-lit.
Therefore it is easier for the user to
find the buttons in darkness and
he/she will be informed about the ac-
tions possible in the corresponding
situation under any circumstances.
Priority switching
Your TeleAlarm ® S12 features an inte-
grated circuit to terminate a local tele-
phone connection if a call for help
transmission is required. This means
that if your telephone is already being
used, the connection will be inter-
rupted to enable the call for help to be
transmitted.
Ensure that the wiring and the plug
connection of your call for help unit
and the local telephone set has been
executed properly.