9
Assembly Instructions
Washer
Washer
Loc Nut
Fig. 2a
Fig. 2
Fig. 2b
Elbow Support
Bracket
Exit Section - 9 bolts
Elbow Section - 9 bolts each
x4
ELBOW AND EXIT SECTION ASSEMBLY
1.
Assemble the Elbow Section by securing as shown in
(Fig. 2)
and
(Fig. 2a)
. Join sections using a hex head
bolt, two flat washers, and a loc nut at each hole
junction.
NOTE:
Fasten each loc nut finger tight. Each time you
join parts be sure each flanged lip is mating with a flat
lip.
2.
Repeat step 1 to assemble (3) remaining Elbow Sections.
3.
Assemble and secure the Exit Section as shown in
(Fig. 2a)
and
(Fig. 2b)
. Make certain to attach the
Elbow Support Bracket
to the bottom of the flange,
as shown in
(Fig. 2b)
.
4.
Tighten all hardware.
NOTE:
Interlocking design of flanges on Elbow pieces
will assist in assembly.
FlANGE DETAIl
Flange Opening
Hex Head Bolt