12
Assembly Instructions
Washer
Washer
Loc Nut
Fig. 5a
Slide Exit
1.
Align Exit Elbow Section so that Hole #1 aligns
with the opening in the flange, as shown in
(Fig. 5)
and
(Fig. 5b)
and secure in place.
2.
Attach the Exit to the Exit Elbow Section so that
the top of the exit matches the seams, as shown in
(Fig. 5c)
and secure in place.
3.
Tighten all hardware.
NOTE:
Interlocking design of flanges on Elbow
pieces will assist in assembly.
Exit Elbow Section - 12 bolts
Exit - 6 bolts
Fig. 5
Flange Opening
Hole #1
Fig. 5b
Fig. 5c
Align Top Edge of
Slide Base with Exit
Section Seam.
Hex Head Bolt