10
Assembly Instructions
Slide Elbows
1.
Align the first elbow section to the Entrance
Section with the seams aligned and the exit facing
downward. Rotate the Elbow (2) holes to the right
as shown in
(Fig. 3)
and secure in place. Look
for the Flange Opening shown in
(Fig. 3a)
.
2.
Align second elbow so that Hole #1 aligns with
the flange opening as shown in
(Fig. 3c)
and
(Fig. 3d)
and secure in place.
NOTE:
Interlocking design of flanges on Elbow
pieces will assist in assembly.
NOTE:
Hand tighten the loc nuts only.
Elbow Section - 12 bolts
Elbow Section - 12 bolts
FlANGE DETAIl
Washer
Washer
Loc Nut
Fig. 3c
Hole #1
Flange Opening
Fig. 3
Flange Opening
Fig. 3a
Fig. 3d
Fig. 3b
Hex Head Bolt