8
Assembly Instructions
Fig. 1
ENTRANCE SECTION ASSEMBLY
NOTES:
• At least two individuals are needed to assemble the 5' Turbo Tube Slide.
• To aid in aligning holes when assembling sections, insert a screwdriver through adjacent holes to maintain hole
alignment.
1.
Assemble the Entrance Section by securing the top seam first, as shown in
(Fig. 1)
and
(Fig. 1a)
. Join sections using a
hex head bolt, two flat washers, and a loc nut at each hole junction.
2.
When securing the bottom seam make certain to attach the
Entrance Bracket
to the left side of the seam as shown in
(Fig. 1)
securing in place as shown in
(Fig. 1a)
.
3.
Tighten all hardware.
Hex Head Bolt
Washer
Washer
Loc Nut
Entrance Section - 8 bolts
Entrance Bracket
Fig. 1a