17
Assembly Instructions
FIGURE 14
2" x 4" x 8-1/4"
2" x 4" x 11-1/4''
2" x 4" x 18"
2" x 4" x 18"
2-1/2" Screws
2-1/2" Screws
2" x 4" x 8-1/4"
(2) 2" Lag Screws
Support Bracket
Fig. 10
Fig. 10a
Fig. 10b
SUPPORT AND BRACKET
ASSEMBLY
1.
Assemble the support base as shown in
(Fig. 10)
.
2.
Attach the support bracket to the support base using
two lag bolts
(Fig. 10a)
.
NOTE:
Pre-drill 1/8" pilot holes.
3.
Place the support beneath the Exit and determine its
final position.
NOTE:
Slide support should fit tightly
beneath the slide to assure proper support. Remove
corresponding nut and bolt, attach support to the slide
as indicated in
(Fig. 10b)
. Re-attach hardware.
4.
Level grade at the bottom of the slide.
Pre-Drill
2'' Lag screw
2-1/2'' screw
Loc Nut
Washer
Hex Head
Bolt
FLUSH