manualshive.com logo in svg

SWF E-U1201, Руководство пользователя, Страница: 36 / 67

Поделиться
Скачать
SWF E-U1201 Скачать руководство пользователя страница 36

37

9.3) OIL SUPPLY

9.3.1) Oil Supply

When supplying oil, use the oil for sewing machine provided by SunStar (spindle oil) or ISO VG18 grade oil.

9.3.2) Manual Oil Supply

1

2

3

4

5

6

Take out the bobbin case from the hook and supply small

amount of oil around the race.

Needle bar and needle bar driving shaft

Within the regular arm

Thread take-up lever guide rail

Oil tank openings on the bed cover (three openings)

The overlapping area of the moving blade and the fixed

blade

Every three to four hours

Once a week

Once a week

Once a week

Once a week

Once a week

①

②

③

, 

④

⑤

⑤

⑥

NO.

Where to Supply Oil

Frequency

Reference Figures

Make sure to turn off the power of the machine before supplying oil.

CAUTION

SunStar is not responsible for the abrasion or damage of the machine due to the failure to
supply oil for a long time by the users.

CAUTION

1) Excessive oil supply may pollute threads and embroidery fabric.
2) Conduct idle operation for 2 to 3 minutes after oil supply.
3) When excessive oil is supplied to the hook, the trimming failure and the thread break

might occur.

CAUTION

Содержание E-U1201




































































Отзывы:

Нет отзывов