12
quality of finished work and productivity can be enhanced.
(13) Automatic Tread Break Sensor
When the upper thread breaks or the lower thread runs out, the sensor can detect it and automatically suspend
the machine operation.
(14) Upper Thread Holder
During sample embroidery, the device prevents the thread from escaping from unused heads and prevents the
upper thread from escaping during embroidery work replacement.
(15) Automatic Return to Forced Stop Position At Power Outage
When there is power supply problem, the frame can be automatically and accurately moved to the position
where it was stopped at the timing of power outage. This function reduces the bad rate of finished products.
(16) 3.5-Inch Floppy Drive Embedded
The 3.5-inch floppy drive is embedded into the operation panel as default so that designs can be input into the
machine by using a floppy diskette (2DD, 2HD also possible to use).
(17) Edit Function
Stitch data and functional codes (jump, close, trimming) can be deleted, changed, or inserted.
(18) Individual Head Operation
With other normal heads remaining untouched, it is possible to operate the heads with broken thread
individually.
(19) Display of the Cause of Machine Stop
(20) Display of RPM
(21) Frame Feeding Speed Setting
The feeding speed can be chosen among high, medium, and low.
(22) Display of Unused Memory
(23) 6.4-inch LCD Monitor Equipped
The 10.4-inch color LCD monitor is attached to the operation panel, showing all information related to
embroidery work at one sight.
(24) Automatic Recognition of Other Companies' Codes
Designs with various formats stored in a floppy diskette can be automatically recognized.
(25) Position Marker
When tracing a design, use the laser beam to check the locations of the frame and the hoop.
[Recognized Formats]
1. SST
2. DST, DSB, DS
3. TAP
4. FMC, FDR
5. ZSK
6. 100
7. EXP