Swatch Lasag SLS 200 CL Series, Инструкция по эксплуатации

Страница: 236 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
© Lasag AG, Thun, 26.02.08 CM
Service instructions
Laser sources
12 Description and repair NLS
86 . 0621 - 12 - 08
X5:
Pin Signal I/O Significance
02d TCABA I
Temperature Cabinet A
Input for NTC
02z TWAT1 I
Temperature Water 1
Input for NTC
04d BEXPOS I
Beam Expander Position
Analogue input, measures the voltage, which is returned from the beam expan-
der
04z TOS1 I
Temperature Optical System 1
Input for NTC
06d,z
UL1,
UH1
I
Differential input for the measurement of the C-module voltage (charging vol-
tage)
08d,z
FLOW1
FLOW1G
I Counter input for measuring the water flow (+12V).
10d USOLL1 O Analogue output, proportional to the setpoint value of the charging voltage.
10z RSAO0 O Reserve analogue output
12d L1 O
Charging command 1
Gives the charging unit the command to charge the C-module.
12z IMP1 O
Pulse 1
pulse output, controls the GSS and with it generates the laser pulses.
14d FP O
Firing Pulse
Every laser pulse triggered generates a positive flank on this signal.
14z WP O
Every laser pulse triggered with the beam shutter open generates a confirma-
tion pulse of a selectable length.
16d HL I
HALT-Signal
Stops the laser pulse instantaneously.
16z TP I
Trigger-Pulse
In the case of external frequency, with every positive flank a laser pulse is trigge-
red.
20b +12V pos. analogue power supply
22b -12V neg. analogue power supply
24b GND int. GND (analogue and digital)
26b +5V dig. power supply
28b +24V Interf. power supply, internal
30b 24Vext Interf. power supply for electrically isolated connections
32b GNDext Interf. power supply for electrically isolated connections.
X6 (BNC)
Pin Signal I/O Significance
center LSPLS1 O Analogue image of the laser pulse (output E-measurement diode).