Swatch Lasag SLS 200 CL Series, Инструкция по эксплуатации

Страница: 176 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
I N D U S T R I A L - L A S E R S
A COMPANY OF THE
Service instructions
Laser sources with LOS
9 Adjustment and repair of the
SLS optical system LOS
© Lasag AG, Thun, 15.05.08 CM
86 . 0629 - 09 - 4
9.3.2 Target line and symmetry (ATP B 1.2)
1. Install the energy calibration mirror on position 1.
2. By means of the energy calibration mirror pos.1, position the pilot laser parallel to the separating
plate pos.2.
3. Carry out ATP point B 1.2.
9.3.3 Energy calibration (ATP B 1.3)
1. Position the thermopile pos. 3 in the pilot laser axis by means of the magnetic holder.
2. Carry out ATP point B 1.2.
9.4 Conclusion
. Laser off, main switch off.
2. Switch off the service key and remove it.
3. Close the cover.