Swatch Lasag SLS 200 CL Series, Инструкция по эксплуатации

Страница: 187 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
Service instructions
Laser sources with LOS
10 Adjustment and description fiber-optic
cable coupling LOS
© Lasag AG, Thun, 15.05.08 CM
86 . 0629 - 10 - 0
10.1.4 Adjustment for Time Sharing (example mirror configuration No. 14)
1. Main switch ON.
2. Select configuration No. 14 with the dip-switch on the LLOS4 print. Adjust the system parameters
SP 49/50/53/54 in accordance with the table Mirror configurations 10.7.
3. In the menu «Processing», set the Fiber Status to 1.
4. Insert an adjusting pin into every Fiber-optic cable socket item 3 (41.9084).
5. Pilot laser ON, beam shutter OPEN.
6. Fix target cross-hair template item 4 at a distance of 1 – 3 m. For LL - configurations with active
outputs No. 1 to No. 4, use the target cross-hair template (45.4022), in case of active outputs No. 5
and No. 6, use the target cross-hair template (45.4698).
Tip: Align the template in such a manner, that when moving the laser source from side to side, the
pilot laser moves through all target cross-hairs of the template.
7. Position the pilot laser beam within the target cross-hairs No. 1 of the template.
Attention: As from now, do not move the laser source anymore.