Swatch Lasag SLS 200 CL Series, Инструкция по эксплуатации

Страница: 210 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
I N D U S T R I A L - L A S E R S
A COMPANY OF THE
Service instructions
Laser sources with LOS
10 Adjustment and description fiber-optic
cable coupling LOS
© Lasag AG, Thun, 15.05.08 CM
86 . 0629 - 10 - 2
10.5 Electrical installation
10.5.1 Connection of the fiber-optic cable sockets
For every fiber-optic cable socket there is a coded connection on the connection module EM-LLOS3.
For not installed fiber-optic cable sockets, a plug with a bridge for the IL signal is plugged in.
10.5.2 Control module EM-LLOS4
In the case of the option Time Sharing, the control module EM-LLOS4 is required for driving the lifting
modules.
10.5.3 Connection of the lifting modules
For every one of the possible lifting modules there is a connection on the control module EM-LLOS4. At-
tention has to be paid, that the installation position and the connection coincide. The installation positions
are marked with the letters A to E and the connections belonging to them with XA to XE. Not occupied
positions do not require any bridges.
10.6 Settings
For every laser source the corresponding decisive settings are indicated in the ATP.
10.6.1 Settings on the control module EM-LLOS4
See also description EM-LLOS4 in chapter 10.4.5.
S1: Binary setting of the number of the installed mirror configuration according to chapter 10.7.
S2: Setting of the current supply time for the solenoid
S3: Setting of the blocking time. The blocking time is necessary, in order to prevent an overloading of
the solenoids. The blocking time is applicable for one cycle and not after each movement.
Lifting module type S2 S3
Lifting module, right-hand 34.1007 4 5
Lifting module, left hand 34.1008 4 5