83
SVANTEK 977W User Manual
10.1.4. Clearing all data records older than 2 years
– Clear Records
The
Clear Records
position enables the
user to delete all records with the creation
date older than 2 years from the date of the
selected record.
<ENT>
Once date selected, a dialogue box
appears asking the user to confirm the
operation at the same time informing how
many records will be deleted and with what
range of time. When records are erased the
message
about
successful
deleting
appears.
<ENT>
10.2. Viewing event records
– Event Logger
The
Event Logger
sub-list enables the
user to view the records of events
connected with the instrument calibration,
programme update and service works and
saved in the Welmec allocated memory.
The
Event Logger
list contains positions
enable the user to view all records
(
All Records
),
to
filter
records
(Filter Records), to find the required record
by
its
identificatory
number
(
Find Record By ID
) or to find required
record by the date of its creation
(
Find Record By Date
).
<ENT>
10.2.1. Viewing all event records
– All Records
The
All Records
position opens the list of
all event records.
The record includes: record Id number,
record CRC, time zone, event type, user
type and name that created that event and
depending of the event type the description
of what has been changed.
<ENT>
The first page of the record consists of six positions: number of the record
(
Record Id.
), it’s CRC (
Record CRC
), used time zone (
Time Zone
), type of
the event (
Type
:
Program Update
,
Date/Time Change
,
Parameter Change
,
Software Dump
,
State of Seal
,
Hardware Error
and
Repair
), type of the
user (
User Type
:
User
,
Verificator
or
Repair
) and name of the user
(
User Name
).
The second page content depends of the event type. There is one exception,
for
Software Dump
there is no second page.
