Svantek SVAN 977W Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 116

background image

2

SVANTEK 977W User Manual

Note: On account of continuous product improvement SVANTEK reserves the right to make

changes to product specifications without notice. To download the most up to date user's manual please visit
our web site at

www.svantek.com

.

This user’s manual presents the firmware revision named 1.26 and bootstrap revision named 1.06 (see the
Unit Label review to check version details).
The succeeding software revisions (marked with the higher numbers) can change the view of some displays
presented in the text of the manual.

WEEE Notice: Do not throw the device away with the unsorted municipal waste at the end of its life.

Instead, hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment.

The software described in this manual is furnished under a license agreement and may be used only in
accordance with the terms of that agreement.

Copyright Notice

Copyright © 2016 Svantek Sp. z o.o.
All rights reserved.
Reproduction without permission is prohibited.

Trademarks

Trademarks or registered marks in this manual belong to their respective manufacturers.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
The

Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the
part of Svantek.
Svantek provides this document “as is,” without warranty of any kind, either expressed or implied, including,
but not limited to, its particular purpose. Svantek reserves the right to make improvements and/or changes to
this manual, or to the products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Svantek assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to
the information herein to correct such errors, and these changes are incorporated into new editions of the
publication.

Technical Support Contact Information:

web:

www.svantek.com

e-mail:

[email protected]

«
1
2
3
4
...
»

Содержание SVAN 977W





















































































































Отзывы:

Нет отзывов

Похожие инструкции для SVAN 977W

Бренд: Kawai Страницы: 142

Бренд: Kawai Страницы: 10

Бренд: C-LOGIC Страницы: 4

Бренд: R.M. Young Страницы: 2

Бренд: Daewoo Страницы: 2

Бренд: YOKOGAWA Страницы: 16

Бренд: Danfoss Страницы: 80

Бренд: ETI Страницы: 2

Бренд: Omega Страницы: 13

Бренд: Trebs Страницы: 44

Greenlee CLM-1000

Бренд: Textron Страницы: 36

Бренд: Nidec-Shimpo Страницы: 6

OPTIFLUX 4040 C Series

Бренд: KROHNE Страницы: 20

Бренд: Alfa Laval Страницы: 18

Бренд: Keller Страницы: 8

Бренд: ACCRETECH Страницы: 104

Бренд: sebaKMT Страницы: 131

Бренд: LaserLiner Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды