manualshive.com logo in svg

Suzuki Wagon R Plus RB310, Руководство по обслуживанию


Поделиться
Скачать
background image

MAINTENANCE AND LUBRICATION 0B-1

0B

SECTION 0B

MAINTENANCE AND LUBRICATION

CONTENTS

Maintenance Schedule ...................................0B-3

Maintenance Schedule Under Normal 
Driving Conditions .........................................0B-3
Maintenance Recommended Under 
Severe Driving Conditions.............................0B-5

Maintenance Service.......................................0B-6

Drive Belt Inspection (M13 Engine)...............0B-6

Water pump and generator drive belt 
inspection ..................................................0B-6
A/C Compressor drive belt (if equipped) 
inspection ..................................................0B-6

Drive Belt Replacement (M13 Engine)..........0B-6

Water pump and generator drive belt 
replacement...............................................0B-6
A/C Compressor drive belt (if equipped) 
replacement...............................................0B-6

Drive Belt Inspection (G10 Engine) ...............0B-7

A/C compressor drive belt inspection (If 
equipped) ..................................................0B-7
Water pump belt inspection.......................0B-7

Drive Belt Replacement (G10 Engine) ..........0B-8

A/C compressor drive belt replacement ....0B-8
Water pump belt replacement ...................0B-8

Camshaft Timing Belt Replacement 
(G10 Engine).................................................0B-8
Valve Lash (Clearance) Inspection 
(M13 Engine).................................................0B-8
Engine Oil and Oil Filter Replacement ..........0B-9
Engine Coolant Replacement .....................0B-11
Exhaust System Inspection.........................0B-11
Spark Plugs Replacement...........................0B-11

Distributor Cap and Rotor Inspection 
(G10 Engine)............................................... 0B-12
Air Cleaner Filter Inspection........................ 0B-12
Air Cleaner Filter Replacement................... 0B-12
Fuel Lines and Connections Inspection ...... 0B-12
Fuel Tank Inspection................................... 0B-13
PCV Valve Inspection ................................. 0B-13
Fuel Evaporative Emission Control 
System Inspection....................................... 0B-13
Brake Discs and Pads (Front) Inspection ... 0B-13
Brake Drums and Shoes (Rear) 
Inspection.................................................... 0B-14
Brake Hoses and Pipes Inspection ............. 0B-14
Brake Fluid Replacement............................ 0B-14
Brake Lever and Cable Inspection.............. 0B-14
Clutch Inspection ........................................ 0B-15
Tires Inspection........................................... 0B-15
Wheel Discs Inspection............................... 0B-16
Wheel Bearing Inspection ........................... 0B-16
Suspension System Inspection................... 0B-16
Steering System Inspection ........................ 0B-16
Drive Shaft (Axle) Boots Inspection ............ 0B-17
Propeller Shafts (4WD) Inspection.............. 0B-17
Manual Transmission Oil Inspection ........... 0B-18
Manual Transmission Oil Replacement ...... 0B-18
Automatic Transmission Fluid Level 
Inspection.................................................... 0B-18
Automatic Transmission Fluid 
Replacement............................................... 0B-19
Automatic Transmission Fluid Cooler 
Hose Inspection .......................................... 0B-19

WARNING:

For vehicles equipped with a Supplemental Restraint (Air Bag) System:
• Service on and around the air bag system components or wiring must be performed only by an

authorized SUZUKI dealer. Refer to “System Components and Wiring Location View and Connec-
tors” under “General Description” in air bag system section in order to confirm whether you are
performing service on or near the air bag system components or wiring. Please observe all WARN-
INGS and “Service Precautions” under “On-Vehicle Service” in air bag system section before per-
forming service on or around the air bag system components or wiring. Failure to follow
WARNINGS could result in unintentional activation of the system or could render the system inop-
erative. Either of these two conditions may result in severe injury.

• Technical service work must be started at least 90 seconds after the ignition switch is turned to the

“LOCK” position and the negative cable is disconnected from the battery. Otherwise, the system
may be activated by reserve energy in the Sensing and Diagnostic Module (SDM).

Содержание Wagon R Plus RB310















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Wagon R Plus RB310

Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Бренд: Metra Electronics Страницы: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Бренд: Halfords Страницы: 4
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Бренд: Carcomm Страницы: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Бренд: Whispbar Страницы: 14
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Бренд: Rago FABRICATION Страницы: 10
Fab Fours H4550 Installation Instructions Manual preview
H4550
Бренд: Fab Fours Страницы: 13
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Бренд: Omix-Ada Страницы: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Бренд: Dodge Страницы: 3
KEKO K162 Installation Instructions Manual preview
K162
Бренд: KEKO Страницы: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Бренд: Road Armor Страницы: 5
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Бренд: Quadratec Страницы: 14
Hummer HX-T Owner'S Manual preview
HX-T
Бренд: Hummer Страницы: 31
Ford transit connect 2012 User Manual preview
transit connect 2012
Бренд: Ford Страницы: 299
Chevrolet 1995 C/K Pickup Owner'S Manual preview
1995 C/K Pickup
Бренд: Chevrolet Страницы: 483
HOLDEN Malibu EM 2015 Owner'S Handbook Manual preview
Malibu EM 2015
Бренд: HOLDEN Страницы: 330
Nugent Tipper Remote Kit User Manual preview
Tipper Remote Kit
Бренд: Nugent Страницы: 21
Honda 2001 Accord Sedan Owner'S Manual preview
2001 Accord Sedan
Бренд: Honda Страницы: 372
Imiola HAK-POL F/005 Fitting Instruction preview
F/005
Бренд: Imiola HAK-POL Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды