Suzuki GSX-R1000 2007, Руководство по обслуживанию

Страница: 288 / 549

5-20 FUEL SYSTEM AND THROTTLE BODY
THROTTLE BODY REASSEMBLY
Reassemble the throttle body in the reverse order of disassem-
bly. Pay attention to the following points:
• With the secondary throttle valves fully opened, install the
STP sensor and tighten the STP sensor mounting screw to
the specified torque.
NOTE:
* Apply thin coat of engine oil to the O-ring.
* Align the secondary throttle shaft end
"
with the groove
#
of
STP sensor.
* Apply grease to the secondary throttle shaft end
"
if neces-
sary.
X
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
\
09930-11950: Torx wrench
"
STP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5lb-ft)
NOTE:
* Make sure the secondary throttle valves smoothly open and
close.
* If the STP sensor adjustment is necessary, refer to page 5-23
for STP sensor setting procedure.
• With the throttle valves fully closed, install the TP sensor
and tighten the TP sensor mounting screw to the specified
torque.
NOTE:
* Apply thin coat of engine oil to the O-ring.
* Align the throttle shaft end
$
with the groove
%
of TP sensor.
* Apply grease to the throttle shaft end
$
if necessary.
X
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
\
09930-11950: Torx wrench
"
TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5lb-ft)
NOTE:
* Make sure the throttle valves smoothly open and close.
* TP sensor setting procedure. (
4-21)