Suzuki GSX-R1000 2007, Руководство по обслуживанию

Страница: 19 / 549

PERIODIC MAINTENANCE 2-7
VALVE CLEARANCE
• Remove the right under cowling. ( 8-5)
• Lift and support the fuel tank. ( 5-3)
• Remove the air cleaner box. ( 5-14)
• Disconnect the CMP sensor coupler .
• Remove the PAIR control solenoid valve .
• Remove the spark plugs. ( 2-5)
• Loosen the throttle body clamp screws at the intake pipe side.
( 5-16)
• Move the throttle body assembly.
• Remove the cylinder head cover. (
3-15)
The valve clearance specification is different for intake and
exhaust valves. Valve clearance must be checked and adjusted,
1) at the time of periodic inspection, 2) when the valve mecha-
nism is serviced, and 3) when the camshafts are removed for
servicing.
Valve clearance (when cold):
Standard: IN. : 0.08 – 0.18 mm (0.003 – 0.007 in)
EX.: 0.18 – 0.28 mm (0.007 – 0.011 in)
NOTE:
* The cam must be at positions,
"
or
#
, when checking or
adjusting the valve clearance. Clearance readings should not
be taken with the cam in any other position than these two
positions.
* The clearance specification is for COLD state.
* To turn the crankshaft for clearance checking, be sure to use a
wrench, and rotate in the normal running direction. All spark
plugs should be removed.
• Remove the valve timing inspection cap .
Inspect every 24 000 km (14 500 miles, 48 months).
EX. IN.