Suzuki GSX-R1000 2007, Руководство по обслуживанию

Страница: 257 / 549

4-102 FI SYSTEM DIAGNOSIS
Step 2
1) Turn the ignition switch ON.
2) Measure the voltage between O/W wire and ground.
PAIR valve voltage: Battery voltage
( O/W – Ground)
\
09900-25008: Multi-circuit tester set
W
Tester knob indication: Voltage ( )
Is the voltage OK?
3) After repairing the trouble, clear the DTC using SDS tool.
( 4-28)
ACTIVE CONTROL INSPECTION
1) Set up the SDS tool. (Refer to the SDS operation manual for
further details.)
2) Turn the ignition switch ON.
3) Click “PAIR Sol operating control”
.
4) Click each button .
At this time, if an operation sound is heard from the PAIR
control solenoid valve, the function is normal.
2
V
YES
• W/G wire open or shorted to ground, or poor
P
connection failure.
• If wire and connection are OK, intermittent trou-
ble or faulty ECM.
• Recheck each terminal and wire harness for
open circuit and poor connection.
• Replace the ECM with a known good one, and
inspect it again.
NO Open or short circuit in the O/W wire.
ECM coupler (Harness side)
2
(Black) (Gray)