Superwind 350 12V, Руководство пользователя

Страница: 58 / 79

V 01-2017
www.superwind.com
57
There are 8 wiring posts on the stop-switch. Only those utilized in
Table 1.4.1 should be used.
However, all screws must be tightened down. If this step is not
done, your Superwind unit may not perform correctly.
Remember, part of your annual Superwind inspection is to
ensure all screw connections on the stop-switch are still tight.
NEVER PUT A CIRCUIT BREAKER OR FUSE BETWEEN THE
STOP SWITCH AND THE WIND TURBINE.
ONLY USE A STOP SWITCH PROVIDED BY SUPERWIND!
SUPERWIND SPECIFICATIONS REQUIRE THE BATTERY TO
BE DISCONNECTED AND NOT SHORT-CIRCUITED WHEN
THE SWITCH IS OPERATED.
A recommended charge regulator is installed between the battery bank and the wind
turbine. The Stop-Switch is placed between the Superwind and the charge regulator with
the mandatory 40 Amp fuses for a 12 volt system or 20 Amp fuses for a 24 volt set. See
details on Graphic No. 1.4.2.