Superwind 350 12V, Руководство пользователя

Страница: 29 / 79

V 01-2017
www.superwind.com
28
7.2 Mast mounting
Before your
Superwind
can be
installed on the mast or support,
the electric cables must be led
through the mast tube and
connected to the generator with
the correct polarity (Section
6.3.3 on page 22).
The following applies to any type of mast or support:
Before assembling
the wind generator,
make sure that,
from the mast top
to a point 650 mm below,
there are no
projecting fittings or ropes
which could obstruct
the rotor
(Graphic No. 7.2.1.2).
This is important because the rotor controller pitches the blades at high wind
velocities, which will reduce the distance from the mast.