Superwind 350 12V, Руководство пользователя

Страница: 31 / 79

V 01-2017
www.superwind.com
30
The included plastic
(Delrin®) bushing needs to
be mounted onto the yaw
shaft of the generator unit.
The two elastomer damping
rings of the yaw shaft as
well as the inner surface of
the plastic bushing have to
be lubricated with
Vaseline®. Graphic No.
7.2.2.1 (showing North
American Delrin® bushing).
Be careful not to damage
the damping rings while
pushing the yaw shaft into
the plastic bushing. (Graphic
No. 7.2.2.1)
Before the plastic bushing is
installed on the yaw shaft,
align the three 16 mm holes
of the bushing concentrically
with the respective threads
M6 of the yaw shaft. Now push the plastic bushing with the collar ahead onto the
elastomer damping rings to the limit stop at the O-ring seal 40x3.
Be careful not to damage the damping rings during installation.
Next, screw the three socket cap screws (M6 x 8) together with the rubber rings
on their head in each of the threads. These bolts have a TUFLOK (blue color)
thread lock, and they can be a bit stiff. Screw until the screw heads are tight to
the yaw shaft. If everything is correct and the screw heads do not protrude, they
will not obstruct the insertion into the mast tube (the face of the screw will be
flush with the OD of the bushing).
Graphic No. 7.2.2.2 (Shown with EU style bushing with adapter bands)